Introduction
Changing your wiper blades is a piece of cake if you follow these steps.
What you need
-
-
Cover the windshield with a towel or blanket to avoid shattering the windshield if the wiper arms come down accidentally after the blades are removed.
-
-
-
The wiper blades are typically connected to the wiper arm with a hook type of closure. Lift the plastic cover and slide the wiper backward to disconnect and carefully remove it. Repeat for the other side.
-
-
-
-
Unpackage your replacement wiper blades, and carefully lift the plastic cover covering the hook connector.
-
-
-
Slide the hook from the wiper arm into the wiper blade and tug slightly until securely connected. Replace the cover and repeat on the other side.
-
-
-
Remove the towel from the windshield and lower the wiper arms back onto the windshield.
-
-
-
Test the wiper blades to ensure they're securely connected and working properly.
-
Ask FixBot
When in doubt, consult your owner's manual or the back of the wiper blade package for further instructions.
Cancel: I did not complete this guide.
3 other people completed this guide.
